From: Meyer, J. (Johan) (JohanMe@xxxxxxxxxx)
Date: Mon Aug 05 2002 - 11:28:48 GMT-3
Yes I have seem many errors in this book this being another
You would think that because this book is Cisco Press there would not be so
many Mistakes?
Who proof reads these books as they should be fired!
Regards
Johan
-----Original Message-----
From: Colin Barber [mailto:Colin.Barber@telewest.co.uk]
Sent: Monday, August 05, 2002 4:16 PM
To: 'Meyer, J. (Johan)'; 'ccielab@groupstudy.com'
Subject: RE: LSAP Access-List for SNA
0x0d0d 0x0000 is just one of the many thousand mistakes in Solie's book.
0x0000 0x0d0d is the correct filter for SNA
Colin
-----Original Message-----
From: Meyer, J. (Johan) [mailto:JohanMe@nedcor.com]
Sent: 05 August 2002 14:49
To: ccielab@groupstudy.com
Subject: LSAP Access-List for SNA
Please can we confirm the following
According to Karl Solie the ACL for LSAP's SNA is 0x0D0D 0x0000
However according to the DLSW Design guide you use 0x0000 0x0D0D
Will both of these achieve the same result?
Thanks
Johan
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:16 GMT-3