From: William lu (mailluw@xxxxxxxxx)
Date: Mon Aug 05 2002 - 02:57:20 GMT-3
Hi,
I use the IOS 12.1(5)T10 as the same as used in the
Lab and it works just fine for connected
redistribution.
If redistibution of connected interface does not work,
you can try to summarize it in R6's tunnel interface
as follows:
int tu0
ip summary-address rip 135.4.24.0 255.255.255.0
You will receive a classful route in R5 from rip
process. Then, you redistribute it into IGRP. I just
just tried it and it works fine.
William
--- "Erick B." <erickbe@yahoo.com> wrote:
> The behavior changed with 12.1(3) if you want to get
> down to details.
>
> URL on this (watch wrap):
>
>
http://www.cisco.com/warp/public/104/redist-conn.html
>
> --- ying c <bf5tgh1@yahoo.com> wrote:
> > Tim,
> >
> > Prior to 12.1, you can redistribute connected into
> > area 0, but I don't think you can do it with 12.1
> or
> > later releases any more.
> >
> > Please correct me if I'm wrong.
> >
> > Chang
> > --- Tim Lewin <tlewin@netstarnetworks.com> wrote:
> > > Armand
> > >
> > > Redistribute connected on R4 so that
> 135.4.24.0/27
> > > network appears as and
> > > external OSPF route on R4 (and not as a
> connected
> > > network as it will appear
> > > as by default). Then on R4 us the OSPF
> > > "Summary-Address" command to
> > > summarise this external OSPF route as 134.4.0.0
> > /16
> > > or 134.4.24.0 /24 back
> > > into OSPF. This summary route will then be
> > delivered
> > > to R5.
> > >
> > > Regard...Tim
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> > > [mailto:nobody@groupstudy.com]On Behalf Of
> > > Armand D
> > > Sent: Monday, 5 August 2002 8:08 AM
> > > To: ccielab@groupstudy.com
> > > Subject: OSPF into IGRP using Summarization
> > solution
> > >
> > >
> > > Hello,
> > >
> > > This is a tough one to get working. I have three
> > > routers one running IGRP the other two in OSPF.
> I
> > > have
> > > searched the archives for solutions and still
> > can't
> > > get this one to work. Router 5 shows all area 1
> > > networks /29 with help of "summary-address"
> > > command. Router 5 does NOT see any Area 0 /27
> > routes
> > > in routing table.I have tried the "area 0
> > > range" command on R4 with no luck. Please look
> > > at
> > > my configs and tell me what I'm missing here.
> > >
> > > Any help would be appreciated.
> > >
> > > R5
> > > |
> > > |
> > > 135.4.56.0/24 IGRP
> > > |
> > > |
> > > R6
> > > |
> > > |
> > > 135.4.36.0/29 OSPF Area 1
> > > |
> > > |
> > > R4
> > > |
> > > 135.4.24.0/27 OSPF Area 0
> > >
> > >
> > >
> > > ====================================
> > > hostname R5
> > > !
> > > ip subnet-zero
> > > !
> > > interface Loopback0
> > > ip address 135.4.5.5 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > interface Ethernet0/0
> > > ip address 135.4.56.5 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > router igrp 10
> > > network 135.4.0.0
> > > !
> > > ip classless
> > > !
> > > end
> > >
> > > ===================================
> > > hostname R6
> > > !
> > > ip subnet-zero
> > >
> > > interface Loopback0
> > > ip address 135.4.6.6 255.255.255.0
> > > no ip directed-broadcast
> > >
> > > interface Loopback200
> > > ip address 135.4.66.6 255.255.255.0
> > > no ip directed-broadcast
> > > ip ospf network point-to-point
> > > !
> > > interface Serial0/0
> > > description to R4
> > > ip address 135.4.34.6 255.255.255.248
> > > no ip directed-broadcast
> > > encapsulation frame-relay
> > > ip ospf message-digest-key 2 md5 secure
> > > ip ospf network broadcast
> > > ip ospf priority 0
> > > frame-relay map ip 135.4.34.4 604 broadcast
> > > frame-relay lmi-type cisco
> > > !
> > > interface Ethernet0/1
> > > description to R5 IGRP
> > > ip address 135.4.56.6 255.255.255.0
> > > no ip directed-broadcast
> > > !
> > > router ospf 1
> > > summary-address 135.4.34.0 255.255.255.0
> > > redistribute igrp 10 metric 1 subnets
> > > network 135.4.6.6 0.0.0.0 area 1
> > > network 135.4.34.0 0.0.0.7 area 1
> > > network 135.4.36.0 0.0.0.255 area 33
> > > area 0 authentication
> > > area 1 authentication message-digest
> > > area 1 virtual-link 135.4.4.4
> message-digest-key
> > 2
> > > md5 secure
> > > !
> > > router igrp 10
> > > redistribute connected
> > > redistribute ospf 1 metric 1 1 255 255 1
> > > network 135.4.0.0
> > >
> > > ==========================
> > >
> > > hostname R4
> > > !
> > > ip subnet-zero
> > > !
> > > interface Loopback0
> > > ip address 135.4.4.4 255.255.255.0
> > > ip ospf priority 255
> > > !
> > > interface Serial0/0
> > > no ip address
> > > encapsulation frame-relay
> > > cdp enable
> > > frame-relay lmi-type cisco
> > > !
> > > interface Serial0/0.1 multipoint
> > > ip address 135.4.34.4 255.255.255.248
> > > no ip split-horizon
> > > ip ospf message-digest-key 2 md5 secure
> > > ip ospf network broadcast
> > > frame-relay map ip 135.4.34.6 406 broadcast
> > > !
> > > interface Ethernet0/1
> > > description to to R2
> > > ip address 135.4.24.4 255.255.255.224
> > > ip ospf authentication-key cisco
> > > !
> > > router ospf 1
> > > area 0 authentication
> > > area 0 range 135.4.24.0 255.255.255.0 cost 1
> > > area 1 authentication message-digest
> > > area 1 virtual-link 135.4.6.6
> message-digest-key
> > 2
> > > md5 secure
> > > network 135.4.4.4 0.0.0.0 area 0
> > > network 135.4.24.0 0.0.0.31 area 0
> > > network 135.4.34.0 0.0.0.7 area 1
> > > !
> > > end
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:16 GMT-3