3920 / TrBRF use with Token Ring router interfaces

From: Paul (sixfooter777@xxxxxxxxxxxxxxx)
Date: Fri Aug 02 2002 - 22:17:59 GMT-3

• Next message: Fanglo MA \(E-mail\): "RE: OSPF classless routes into IGRP"
• Previous message: Javed Tufail: "Looking for a Lab Date between Aug29 and Sep 15"
• Next in thread: yakout esmat: "RE: 3920 / TrBRF use with Token Ring router interfaces"
• Maybe reply: yakout esmat: "RE: 3920 / TrBRF use with Token Ring router interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Please can someone help me with this concept.

If I configure 2 TrBRF's and 2 TrCRF's on the 3920 switch, say TrBRF 0xA with
TrCRF 0x100 and TrBRF 0xB with TrCRF 0x200, would I reflect this such like :

Router A

source-bridge ring-group ( virtual ring in decimal, say 150 )

int to0/0
  source-bridge 256 10 150

Router B

source-bridge ring-group 150

int to0/0
   source-bridge 512 11 150

Is this concept correct ? I couldn't use SRB because I am using 2 TrBRF's so I
need a layer 3 device to span the 2 networks I take it ?

A good case for using then DLSw ???

Many thanks Paul.

• Next message: Fanglo MA \(E-mail\): "RE: OSPF classless routes into IGRP"
• Previous message: Javed Tufail: "Looking for a Lab Date between Aug29 and Sep 15"
• Next in thread: yakout esmat: "RE: 3920 / TrBRF use with Token Ring router interfaces"
• Maybe reply: yakout esmat: "RE: 3920 / TrBRF use with Token Ring router interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:15 GMT-3