From: Wade Edwards (wade.edwards@xxxxxxxxxxxxxxxxxxx)
Date: Fri Aug 02 2002 - 18:22:37 GMT-3
Don't know if someone has responded back to you on this one. You cannot
do auto-install on a hub that is using point-to-point subinterfaces. The
reason is because when the spoke device issues an Inverse ARP, the hub
router does not know which IP address the spoke is using. When the hub
has a frame-relay map statement, the hub router will know what the IP
address of the spoke router should be, because of the frame-relay map
statement, based upon the incoming DLCI number the IARP was received on.
Let me know if you have any more questions. I did some research about
this about a year ago.
-----Original Message-----
From: Ademola Osindero [mailto:osindero@lagos.sns.slb.com]
Sent: Tuesday, July 23, 2002 12:17 AM
To: ccielab@groupstudy.com
Subject: Auto-Install on Point-to-point interfaces
Hi group,
Has anyone ever tried setting up auto-install on a point-to-point
interface?
Regards,
Osindero Ademola
Schlumberger Network Solutions
Tel: 234 1 261 0446 Ext 5427
Fax 234 1 262 1034
email:osindero@lagos.sns.slb.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3