From: Tony H. (aamercado31@xxxxxxxxx)
Date: Fri Aug 02 2002 - 13:52:19 GMT-3
Please refer to the link below for the bus error:
http://www.cisco.com/warp/customer/122/crashes_buserror_troubleshooting.shtml#s
econd
a "show region" would really help but if you can't get
it, refer to Cisco's Memory map and looking at the
memory map for the RSP:
http://www.cisco.com/warp/public/112/appB.html
You will find whether you have a bad memory or a
software bug
HTH
--- Siddig A Dongola <siddig99@hotmail.com> wrote:
> Can you please send the bus error message that
> include address : xxxx PC
> :yyyyyy as well as the output of show region?
> ----- Original Message -----
> From: "Jaspreet Bhatia" <jasbhati@cisco.com>
> To: <ccielab@groupstudy.com>
> Sent: Friday, July 26, 2002 10:28 PM
> Subject: 7505 Crashing due to bus errrors
>
>
> > Folks,
> > I have a question . I have a 7505
> router running 12.0(5)
> XE5
> > ( not been upgraded due to well, political reasons
> ) . We have GEIPs on
> > this router . It crashes every now and then and
> the syslog messages point
> > to the GEIP . Initially we thought that the GEIP
> had gone bad but even
> > after replacing teh GEIP it happened . So
> obviously it is not the GEIP . I
> > just looked into teh Hardware comapatablity matrix
> on CCO and it does not
> > list my IPS ver as being compatible with the GEIP
> . I have this config (
> > same IPS ver) running on other routers but they
> have never crashed . Do
> you
> > think that I should replace the IOS image with one
> that says that it is
> > compatible with the GEIP on CCO ?
> >
> > Thanks
> >
> > Jaspreet
> >
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3