From: Erick B. (erickbe@xxxxxxxxx)
Date: Fri Aug 02 2002 - 01:46:42 GMT-3
Hi,
Just curious if anyone here has used IPX EIGRP on a
1721 w/12.2(8)YL connecting to a 1600 w/11.2 code.
Previously had 1600 instead of 1721 and worked fine.
Now with 1721 in place with same config IPX EIGRP
routes go into hold down (EH) after a few seconds.
Debugs show the initial routes being learnt from
serial0 then a better route being learned for same
network over serial0. Serial0 connects to 1600 and the
1600 EIGRP routes are stable and not flapping. IPX RIP
works fine.
Erick
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3