From: alee@xxxxxxxxx
Date: Thu Aug 01 2002 - 17:07:33 GMT-3
Joe,
I just made it! I erased the flash, then executed the command "no
partition flash" which made the flash into 16M without partition. Then I
used TFTP to load IOS 12.1 without rebooting the router.
Arthur Lee
Senior Network Engineer
CCC Information Services
312-229-3518
Joe
<GroupStudy@comca To: alee@cccis.com, cciela
b@groupstudy.com
st.net> cc:
Subject: RE: how to clear parti
tion flash
08/01/2002 02:42
PM
Please respond to
GroupStudy
I just did this last week believe it or not, but I don't remember exactly
what I did. I think I erased flash first, rebooted into rommon, then
entered the full command 'no partition flash 2 8 8' exactly as in the
config. I think that did it.
- JOE
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
alee@cccis.com
Sent: Thursday, August 01, 2002 1:15 PM
To: ccielab@groupstudy.com
Subject: how to clear partition flash
Hi guys,
I need your help to clear flash partition. I have one 2514 router with 2
partition. It was pre-configured as "partition flash 2 8 8". So, each
partition has 8M. I tried to un-partition by "no partition flash" and "no
partition flash 2 8 8" with no luck. Does anyone know how to clear the
partitions so I can get 16M of flash in order to load IOS 12.1 version.
Thanks.
Arthur Lee
Senior Network Engineer
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3