RE: SSH to home lab

From: Kleberg, Jason (JKleberg@xxxxxxxxx)
Date: Thu Aug 01 2002 - 16:46:02 GMT-3

Next message: alee@xxxxxxxxx: "Re: how to clear partition flash"
Previous message: Snow, Mark: "RE: Frame-relay switching"
Maybe in reply to: Kleberg, Jason: "SSH to home lab"
Next in thread: Raymond Jett: "RE: SSH to home lab"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

If I am reading this doc correctly, it is for 7000 series and higher routers
only. Is there anything for 2500/2600 series routers?

thanks

-----Original Message-----
From: Raymond Jett [mailto:rajett@cisco.com]
Sent: Thursday, August 01, 2002 2:39 PM
To: Kleberg, Jason; ccielab@groupstudy.com
Subject: RE: SSH to home lab

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
limit/120s/120s5/sshv1.htm

And yes, it does work on a 2500 with the correct version of IOS.... I dont'
remember the minimum offhand... I'm using 12.2(5)

Oh, and you have to have the IPSEC version of IOS to do it.

Raymond

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Kleberg, Jason
Sent: Thursday, August 01, 2002 1:26 PM
To: ccielab@groupstudy.com
Subject: SSH to home lab

This may have been addressed already(I cant get the archive search to
work).. How does one go about setting up ssh to home lab? Are there any
detailed docs about how to set this up. I am a linux newbie and would
really like it if there was a site that could show me how to get this done.
I appreciate any help...
thanks

Next message: alee@xxxxxxxxx: "Re: how to clear partition flash"
Previous message: Snow, Mark: "RE: Frame-relay switching"
Maybe in reply to: Kleberg, Jason: "SSH to home lab"
Next in thread: Raymond Jett: "RE: SSH to home lab"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3