From: Asim Khan (asimmegawatt@xxxxxxxxx)
Date: Thu Aug 01 2002 - 16:07:44 GMT-3
You have to use the command the "partition flash 1" or
"no partition flash". If there are files in a
partition other than the first, you must use the erase
flash-filesystem:partition-number command to erase the
partition before reverting to a single partition.
Asim Khan
--- CiscoJunkie <ciscojunkie@teamhealth.com> wrote:
> Erase flash first...
>
> ----- Original Message -----
> From: <alee@cccis.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, August 01, 2002 1:14 PM
> Subject: how to clear partition flash
>
>
> > Hi guys,
> >
> > I need your help to clear flash partition. I have
> one 2514 router with 2
> > partition. It was pre-configured as "partition
> flash 2 8 8". So, each
> > partition has 8M. I tried to un-partition by "no
> partition flash" and "no
> > partition flash 2 8 8" with no luck. Does anyone
> know how to clear the
> > partitions so I can get 16M of flash in order to
> load IOS 12.1 version.
> > Thanks.
> >
> >
> > Arthur Lee
> > Senior Network Engineer
> >
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3