From: P729 (p729@xxxxxxx)
Date: Thu Aug 01 2002 - 15:19:07 GMT-3
Don't forget this one (LBO) if you see errors with a short crossover cable:
http://www.cisco.com/warp/public/471/64.html#command
It's not supposed to be "necessary" with Cisco T1 WICs, but...
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Jeremy Junginger" <jjunginger@interactcommerce.com>
To: "Walker, James - Is" <JWALKER2@PARTNERS.ORG>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, August 01, 2002 9:26 AM
Subject: RE: T1 crossover from WIC to WIC
No, I actually meant T1 WIC with Integrated CSU/DSU. I found the
following links helpful:
Helpful Links:
http://www.cisco.com/warp/public/471/75.html#command (Main Link)
http://www.cisco.com/warp/public/471/59.html#command
http://www.cisco.com/warp/public/471/65.html#command
http://www.cisco.com/warp/public/471/63.html#command
http://www.cisco.com/warp/public/471/60.html#command
http://www.cisco.com/warp/public/471/61.html#command
-Jeremy
-----Original Message-----
From: Walker, James - Is [mailto:JWALKER2@PARTNERS.ORG]
Sent: Thursday, August 01, 2002 9:17 AM
To: Jeremy Junginger; ccielab@groupstudy.com
Subject: RE: T1 crossover from WIC to WIC
You must mean serial interface not FastEthernet.
-----Original Message-----
From: Jeremy Junginger [mailto:jjunginger@interactcommerce.com]
Sent: Thursday, August 01, 2002 12:02 PM
To: ccielab@groupstudy.com
Subject: T1 crossover from WIC to WIC
Quick Question:
Anyone have a config snippet of 2 routers connected WIC to WIC via T1
Crossover cable? I have been searching the archives for a link (no pun
intended..heheh..). Any information, links, posts would be greatly
appreciated:
|---Fa0/0(Router1)WIC--T1-Crossover---WIC(Router2)Fa0/0---|
Jeremiah A. Junginger
[GroupStudy.com removed an attachment of type
application/x-pkcs7-signature which had a name of smime.p7s]
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:14 GMT-3