From: Asim Khan (asimmegawatt@xxxxxxxxx)
Date: Thu Aug 01 2002 - 09:42:30 GMT-3
As, others mentioned, you have to enable split
tunneling in order to allow users to access the
internet. For that you have to define Network List
under
Configuration | Policy Management | Traffic Management
| Network Lists
Regards.
Asim Khan
--- Peter Wodle <peter_wodle@hotmail.com> wrote:
> OK, I can logon to NT domain via Radius with Cisco
> VPN client. The issue now
> is when VPN client is firedup, can't browse Internet
> anyloger. Any ideas how
> the Internet traffic can be directed to stay outside
> VPN tunnel & go to the
> Internet rather than the tunnel?
>
>
>
> >From: "Peter Wodle" <Peter_Wodle@hotmail.com>
> >To: <security@groupstudy.com>
> >Subject: VPN 3000 client
> >Date: Fri, 26 Jul 2002 18:28:03 +0100
> >
> >Can anyone suggest the best (most secure etc) way
> to connect to NT 4 domain
> >network from the Internet via Cisco VPN 3005?
> Should I use the Cisco VPN
> >client? What authentication method is best e.g.
> RADIUS on NT 4 server
> >domain etc?
> >
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:13 GMT-3