From: Khalid Siddiq (khalid@xxxxxxxxxx)
Date: Thu Aug 01 2002 - 07:16:44 GMT-3
Yes,i am sure about that, but i am missing one thing the formula for calculatin
g the metric.
router eigrp 1
metric weight 0 0 0 1 0 0
khalid
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Thursday, August 01, 2002 1:57 PM
To: Khalid Siddiq
Cc: ccielab
Subject: RE: EIGRP (Impossible design ....???)
Maybe you missed something, Maybe I am missing something,...?
Command goes under EIGRP, Are you sure, because this is not supposed to
be...???
Anyone else any comments.
> -----Original Message-----
> From: Khalid Siddiq [SMTP:khalid@sys.net.pk]
> Sent: 01 August 2002 10:12
> To: Erick B.; Casey, Paul (6822); ccielab
> Subject: RE: EIGRP (Impossible design ....???)
>
> Paul,
> by changing the metric weight to K1=K2=k4=k5=0 and k3=1, router calculate
> the metric based on the Delay only ?
> i test the scenerion and see that it still include the bandwidth in the
> metric calculation.
> clarify if i miss something.
> khalid
>
>
> -----Original Message-----
> From: Erick B. [mailto:erickbe@yahoo.com]
> Sent: Thursday, August 01, 2002 9:19 AM
> To: Casey, Paul (6822); 'ccielab'
> Subject: Re: EIGRP (Impossible design ....???)
>
>
> How about 2 EIGRP processes?
>
> --- "Casey, Paul (6822)" <Paul.Casey@o2.com> wrote:
> > Hello,
> >
> > Being testing this is the lab, for the past few
> > hours.
> > As far as I can see the only way to get a router
> > running EIGRP to use total
> > delay as its only metric is to modify the K
> > constants.
> > and set the following :
> >
> > metric weights 0 0 0 1 0 0
> > This sets the total delay as the only usable
> > parameter, as K1 has now be
> > cancelled
> >
> > So you have K3 =1 and K1 = k2 = k4 = k5 = 0
> > as K2,K4,K5 default to 0 anyway.
> >
> > This will force the router to use only total delay
> > for all routes,
> > It will ignore bandwidth parameters which will not
> > be factored into the dual
> > algorithm
> > You also need to set the peer neighbor with the same
> > metric weights,
> > Mismatched K constants = No peering.
> > What I am looking to do is set EIGRP to use total
> > delay only for a
> > particular route in the routing table and to use the
> > Normal K values for all
> > other routes in the routing table, which would
> > include bandwidth.
> >
> > Offset lists don't help because all the are doing is
> > changing the delay
> > values to influence routing, they don't remove
> > bandwidth from the DUAL
> > calculation.
> >
> > Is what I want to do possible....???????
> >
> > Any help appreciated.
> > Paul.
> >
> >
> >
> >
> >
> >
> **************************************************************************
> **************
> >
> > This E-mail is from O2. The E-mail and any files
> > transmitted with it are confidential and may also be
> > privileged and intended
> > solely for the use of the individual or entity to
> > whom they are addressed.
> > Any unauthorised direct or indirect dissemination,
> > distribution or copying
> > of this message and any attachments is strictly
> > prohibited. If you have
> > received the E-mail in error please notify
> > postmaster@O2.com or
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:13 GMT-3