From: kasturi cisco (kasturi_cisco@xxxxxxxxxxx)
Date: Wed Jul 31 2002 - 15:08:01 GMT-3
Hi,
Since the network type is "Non broadcast" even though u have map statements
the broadcast wont be sufficient.u have to add the "neighbor statement"
under OSPF process for each neighbor.
HTH,
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>chenyan
>Sent: Wednesday, July 31, 2002 10:28 AM
>To: ccielab
>Subject: ospf over nbma again
>
>
>hi,guys,
>
>My question is when the network types are non-brocdcast all on both hub and
>spokes where the hub with multipoint subinterfaces and the spoke with the
>phycial interface,and the ip ospf network is unavailable.
>
>I can see in the out of the command "sh ip ospf interface s1" that all the
>interfaces are non-broadcast, but why not adj?
>
>Thanks
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:50 GMT-3