ipx snapshot routing

From: zlf (pstn100@xxxxxxxx)
Date: Wed Jul 31 2002 - 00:33:40 GMT-3

• Next message: kris.keen@xxxxxxxxxx: "OT: Boot-2500 Bootrom for Cisco 2503 Needed"
• Previous message: Ouellette, Tim: "RE: RIP Broadcast issues and NBMA stuff. ? directed-broadcast?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hi,
when I configure ipx snapshot routing, I find a problem.the snapshot server rou
ter can learn routes in sanpshot client router,but snapshot client router can n
ot learn the routes in client server,why?
here is my configuration,do I configure something wrong?

server router

interface BRI0/0
 no ip address
 no ip directed-broadcast
 encapsulation ppp
 dialer map ipx 6005.0006.0006.0006 name r6 broadcast 3621211
 dialer load-threshold 51 either
 dialer-group 1
 ipx network 6005
 isdn switch-type basic-net3
 snapshot server 10 dialer

client router

interface BRI0/0
 no ip address
 encapsulation ppp
 dialer map snapshot 1 name r5 broadcast 3621217
 dialer map ipx 6005.0005.0005.0005 name r5 broadcast 3621222
 dialer load-threshold 51 either
 dialer-group 1
 ipx network 6005
 isdn switch-type basic-net3
 snapshot client 10 30 dialer

zlf

• Next message: kris.keen@xxxxxxxxxx: "OT: Boot-2500 Bootrom for Cisco 2503 Needed"
• Previous message: Ouellette, Tim: "RE: RIP Broadcast issues and NBMA stuff. ? directed-broadcast?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:49 GMT-3