From: Ouellette, Tim (tim.ouellette@xxxxxxx)
Date: Mon Jul 29 2002 - 07:40:40 GMT-3
What about a route-map to set the eigrp metric for a specific prefix?
Since an offset-list will only modify the "delay" which will obvious change
the metric, I wonder if I route-map to set a metric will only modify the
"delay"
I'll start digging too and see what I can come up with.
Tim
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Monday, July 29, 2002 5:33 AM
To: 'Ouellette, Tim'
Cc: 'ccielab@groupstudy.com'
Subject: RE: A unusual problem..
I dont know if this will work,
All that seems to do is increase the total delay,
What the question seems to state is that the ONLY metric that the route to
this /32 address a couple of hops away, is to use is total delay,
this kinda implies that the bandwidth needs to be reduced to 0 and any other
factors that will infllence the metric need to be set to 0 except for total
delay, and possibly use a route-map to match the route and apply .
But how you do you modify the K1 constant Just for 1 route.... I am curious
to find the answer to this question...
Any help appreciated.
Kind regards,
Paul.
> -----Original Message-----
> From: Ouellette, Tim [SMTP:tim.ouellette@eds.com]
> Sent: 29 July 2002 05:06
> To: 'Casey, Paul (6822)'
> Cc: 'ccielab@groupstudy.com'
> Subject: RE: A unusual problem..
>
> Paul,
>
> did you try using a "offset-list"? That will increase only the delay
> portion
> of the metric.
>
> From the page I read.
>
> With EIGRP and IGRP offset-lists directly modify the delay metric. So an
> offset-list value of 20 would increase the delay metric by 20. An
> offset-list would be the preferred method if:
>
> You only wanted to influence a particular path being advertised by R4.
>
>
> Additional routers were connected to the 10.1.3.0/24 subnet and you did
> not
> want to influence paths that they originated.
>
>
> Or were you talking about the "metric weights tos k1 k2 k3 k4 k5" command
>
> Please let me know.
>
> Tim
>
>
>
> -----Original Message-----
> From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
> Sent: Saturday, July 27, 2002 11:19 AM
> To: 'ccielab@groupstudy.com'
> Subject: A unusual problem..
>
>
> > Hello,
> >
> > Does anyone know how to do the following : from a CCIE level lab I am
> > working on at the moment.
> >
> > The router is running EIGRP and you have to do the following.
> > Set "total delay" as the only IGP metic when connecting to a specific
> > loopback/32 address 3 hops away.
> >
> > Now there is full reachability so thats no problem. and there are also
> > tons of other routes in the routing table.
> > But some how you need to match the loopback address/32 route and modify
> > the metrics for that alone, and only use total delay,
> > Every other route must continue as normal..with normal metrics
> >
> > I tried using route-map and a few other things...and messing with the
> > weights but in reality getting nowhere
> > nothing seems to come close to doing this. Cant figure out how to do
> this
> > at all.
> >
> > Anyone ever come accross something like this before or know what to do..
> ?
> >
> > Any help appreciated.
> > Kind regards.
> > Paul.
> >
>
>
> **************************************************************************
> **
> ************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and
> intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> **************************************************************************
> **
> *************
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:48 GMT-3