From: Cade Wagner (cwagner@xxxxxxxxxxxx)
Date: Sun Jul 28 2002 - 17:50:07 GMT-3
Auto-cost X is the command under the ospf process where X is in
X/BW. (needed to get the interface speeds higher than 100 to compute a cost
other than 1)
Cade
-----Original Message-----
From: ccie candidate [mailto:ccie1@lycos.com]
Sent: Sunday, July 28, 2002 4:38 PM
To: 'ccielab@groupstudy.com'; Casey, Paul (6822)
Subject: (No Subject)
there is a command which will allow the ospf to adjust its metric value so
that it takes into consideration the gigabit speed..
standard ospf will recognize up to 100M ( you know the cost is 100M/BW)
..however placing that command will somehow change this formula ..i dont
remember it now .
--On Sun, 28 Jul 2002 19:26:04 Casey, Paul (6822) wrote: >Can someone help me wirth the following secenrio question. > > >A gigibit ethernet module is being added to a router, >Configure ospf so it can identify between different types of high speed >interface type's > > >Any help appreciated. >Kind regards. >Paul. > > > > > >Paul Casey >O2 Ireland > Core Network Eng'g Team >76 Lower Baggot Street, Dublin 2. >> * Mob : +353 86 8143310 >E-mail: paul.casey@o2.com > > PLEASE NOTE THAT THE ABOVE CONFIDENTIAL INFORMATION I > >> See what you can do www.o2.ie >> > > >*************************************************************************** ************* > >This E-mail is from O2. The E-mail and any files >transmitted with it are confidential and may also be privileged and intended >solely for the use of the individual or entity to whom they are addressed. >Any unauthorised direct or indirect dissemination, distribution or copying >of this message and any attachments is strictly prohibited. If you have >received the E-mail in error please notify postmaster@O2.com or > telephone ++ 353 1 6095000. > >*************************************************************************** **************
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3