From: Przemyslaw Karwasiecki (karwas@xxxxxxxxxxx)
Date: Sun Jul 28 2002 - 12:58:41 GMT-3
Which is consistent with IOS reference manuals:
"If the interface configuration includes either the encapsulation
frame-relay or encapsulation smds command, then the default is
for split horizon to be disabled."
After all, one cannot use "encapsulation" command on ptp or mtp
subintefaces, that's why in such cases split horizon is ENABLED,
as mentioned by Caslow.
BTW -
I am trying to learn as much as I can WITH IOS documentation,
which any of us will have access to during lab. That is why
I try to find references to all common problems on UniverCD,
so maybe they will stick in my mind, and I will find them
useful on the lab date.
Przemek
On Sun, 2002-07-28 at 09:32, Prakash H Somani wrote:
> Friends correct me If I am wroing...
>
> For Frame-Relay -- Split-Horizn is Disabled only on physical
> interface....it is by default enabled on PTP and PTM
> interface...(CASLAW SAYS THIS)
>
> Regards...Prakash
>
> On Sun, 28 Jul 2002 steven owen wrote :
> >on p-to-p fr lines ,which runs rip ,i think i should
> >enable ip split-horizon (which is disable default),or
> >route loop may appear .but if runs ospf,it seems
> >unnecessary.
> >so is "ip split-horizon "necessary only on rip&igrp
> >routing network?
> >
> >Thanks
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3