From: Erick B. (erickbe@xxxxxxxxx)
Date: Sun Jul 28 2002 - 03:28:07 GMT-3
I don't know if anyone has replied yet...
Hub has a multipoint subinterface. Thats 1 interface
and interface authentication is done on the whole
interface. If you don't want authentication on the
other spoke then create another subinterface and
subnet for that spoke.
No way to do per-PVC OSPF authentication that I know
of, and as far as I recall thats not part of the RFC.
--- yakout esmat <yesmat@iprimus.com.au> wrote:
> I have come across a OSPF Interface authentication
> issue might or might not
> be of significance.
>
> If we have hub and two spokes in frame relay network
> sharing the same
> subnet.
>
> If I do interface authentication between the hub and
> one of the spokes only,
> I lose adjancey with the other spoke understandably.
>
> Is there a way with which we can do interface ONLY
> authentication (not are
> authentication) between hub and only one of the
> spokes without loosing the
> other spoke??
>
> I would think not, but if any body has insight on
> this issue, would be
> appreciated.
>
> Cheers
>
> Yakout
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3