From: CC (ccie@xxxxxxxxxxxxxxx)
Date: Sat Jul 27 2002 - 14:56:09 GMT-3
According to Solie's book CCIE Practical Studies Volume I (page 363) the "no
arp frame-relay command" should disable arp responses on that interface.
After testing, I found that even with this command a router will still
respond to arp requests and continues to send arp requests as well. It
doesn't seem to have any effect on the frame relay inverse arp process. CCO
doesn't seem to clear it up either. The CCO summary states that the command
"Enables ARP over a Frame Relay encapsulated interface."
Does anyone have any insight to how this command works?
Jason
----- Original Message -----
From: "Ng, Kim Seng David (David)" <ksng@avaya.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, July 27, 2002 11:13 AM
Subject: arp frame-relay
> Hi group,
>
> Must "no arp frame-relay" be configured besides "no frame-relay
inverse-arp" to ensure no additional pvcs are automatically map on a certain
frame-relay serial interface?
>
> Thank you
> David
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:46 GMT-3