From: Praveen Bahethi (pbahethi@xxxxxxxxxxxxxxxxxxx)
Date: Sat Jul 27 2002 - 00:58:02 GMT-3
Hunt,
The 2500 must have boot roms that support the 16MB of Flash-
4.14(9.1) BootStrap won't.
You can order the bootroms from Cisco, there used to be free, but that was a
Y2K issue.
Be careful when installing. Just look for the FW1 and FW2 numbers and make
sure you replace the appropriate bootrom with the newer version.
V/R,
Praveen
----- Original Message -----
From: "Hunt Lee" <ciscoforme3@yahoo.com.au>
To: <ccielab@groupstudy.com>
Sent: Friday, July 26, 2002 8:27 PM
Subject: Flash Error
> I have just upgraded my 2501 router with 16MB Flash. Since then,
> when I power-on / reload my router, the following error message comes
> up.... however, the router still seems to be able to boot and
> operational... any ideas :-)
>
> N.B:- I'm using IOS Version 12.2(10b) (c2500-p-l.122-10b.bin)
>
> System Bootstrap, Version 4.14(9.1), SOFTWARE
> Copyright (c) 1986-1994 by cisco Systems
> 2500 processor with 16384 Kbytes of main memory
>
> ERR: Invalid chip id 0x80B5 (reversed = 0x1AD ) detected in System
> flash
>
>
> Thanks!!!
>
> H.
>
> http://digital.yahoo.com.au - Yahoo! Digital How To
> - Get the best out of your PC!
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:46 GMT-3