From: Jonathan V Hays (jhays@xxxxxxxx)
Date: Fri Jul 26 2002 - 23:12:27 GMT-3
(You COULD search the groupstudy archives, since the topic has come up
before. I'd suggest learning how to do basic research before you sit for
the CCIE Lab.)
Although LSAP is a token ring header field, I believe that it simply
uses the common Ethernet Type code listed in RFC 1700.
Cisco has a list of them here
http://www.cisco.com/univercd/cc/td/doc/product/software/ssr83/rpc_r/410
9.htm
Or if you'd rather use the list in the 3920 guide:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3920/ct3920ug/cod
es.htm
-Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
zlf
Sent: Wednesday, July 24, 2002 11:18 PM
To: ccielab@groupstudy.com
Subject: type-code-ibm
when I config access-list(type-code-ibm),where can i find the type-code
table for lsap.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:46 GMT-3