From: Brian Dennis (brian@xxxxxx)
Date: Fri Jul 26 2002 - 17:26:32 GMT-3
Nate,
Do you know if it can handle issues like if the router's prompt is X do
this but it the router's prompt is Y do that? I've written some pretty
long VB scripts for it but I haven't seen how to handle these types of
issues.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: Nate vanMaren [mailto:nate@sisna.com]
Sent: Friday, July 26, 2002 1:20 PM
To: Brian Dennis
Cc: ccielab@groupstudy.com
Subject: Re: Ping Scripts with Reflection or SecureCRT?
SecureCRT is capable of hosting "ActiveX Script" engines. The most
common ActiveX script engines are
VBScript and JScript (Microsoft's version of JavaScript), both of which
are freely available from
Microsoft. Chances are you already have them installed if you've
installed Internet Explorer 4.0.
ActiveX script engines communicate with SecureCRT via standard
interfaces. Therefore, SecureCRT can
host any compliant script engine to run your scripts. The advantage of
this approach is that you can
script SecureCRT using the language of your choice. If an ActiveX script
engine is available for
your preferred scripting language, you can write scripts that will work
with SecureCRT
Scripts for SecureCRT are text files that you create with your text
editor. Each script that
SecureCRT runs must have a header that begins on the first line of the
script. The header is used by
SecureCRT to identify which script language the script is written in and
the version of SecureCRT's
scripting interface. Each line of the script header must begin with a
(#) character. The SecureCRT
script header requires a $language line that identifies the script
engine and an $interface line to
identify SecureCRT's interface version.
-Nate
----- Original Message -----
From: "Brian Dennis" <brian@5g.net>
To: "'Michael Snyder'" <msnyder@ldd.net>
Cc: <ccielab@groupstudy.com>
Sent: Friday, July 26, 2002 2:12 PM
Subject: RE: Ping Scripts with Reflection or SecureCRT?
> SecureCRT supports line delay just like HyperTerm. I don't know of
> anything that is in HyperTerm that isn't in SecureCRT. As a side note
> SecureCRT really doesn't support true scripting but it can execute a
> sequence of commands which is very useful.
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Michael Snyder
> Sent: Thursday, July 25, 2002 4:39 PM
> To: 'Joe'
> Cc: ccielab@groupstudy.com
> Subject: Ping Scripts with Reflection or SecureCRT?
>
> Well, it's news to me that they aren't using hyperterm anymore.
>
> Hyperterm sucks, but it was a known evil vs. an unknown one.
>
> Here's the rub, I use ping scripts that require about 1100 ms per
line.
>
> Will the new terminal programs allow line timing settings? I bet not.
>
> I just downloaded SecureCRT and it doesn't seem to have those
settings,
> thought It appears to have real scripting support. That has
> possibilities.
>
> How about a complete canned script that does ospf. Just thinking.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Joe
> Sent: Thursday, July 25, 2002 5:13 PM
> To: 'Michael Snyder'; 'Shaun Wakelen'
> Cc: ccielab@groupstudy.com
> Subject: RE: Practice with Reflection or Hyperterm???
>
> When I last took the lab, it was with Reflections. And note that we
> were
> explicitly told NOT to make any settings changes in Reflections, but I
> think
> that will depend who proctors.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Michael Snyder
> Sent: Thursday, July 25, 2002 3:06 PM
> To: 'Shaun Wakelen'
> Cc: ccielab@groupstudy.com
> Subject: Practice with Reflection or Hyperterm???
>
>
> I'm a bit slow at times.
>
> Is the terminal program now used in the lab, Reflection?
>
> Gee, I'm been using hyperterm forever because they used it in the lab.
>
> So in review,
>
> If I'm taking my lab in RTP next month, I should be using reflection
to
> practice?
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Shaun Wakelen
> Sent: Thursday, June 06, 2002 6:41 AM
> To: eric ong
> Cc: ccielab@groupstudy.com
> Subject: RE: Break sequence for Reflection?
>
> Eric
>
> Set-up customised buttons on the toolbar to do the various break
> sequences
> you have listed. I just use CTRL-^^, CTRL-^x and CTRL-BREAK.
> (Setup-Toolbar-Customize, then New Button and ensure you have checked
> the
> box 'insert special characters using the keyboard'). I also configured
> these
> on the lab. Takes a few minutes, but well worth it I feel.
>
> Shaun Wakelen
> #9007
>
> -----Original Message-----
> From: eric ong [mailto:ongyongk@yahoo.com]
> Sent: 06 June 2002 12:17
> To: ccielab@groupstudy.com
> Subject: Break sequence for Reflection?
>
> May I know the break sequence for the Reflection terminal app used in
> the
> CCIE lab?
>
> Have tried Ctrl-Shift-6, Ctrl-C, Ctrl-Break, Ctrl-Alt-Break,
> Ctrl-Shift-Break, etc...
>
> Thanks.
>
> eric
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3