From: Brian Dennis (brian@xxxxxx)
Date: Fri Jul 26 2002 - 17:12:11 GMT-3
SecureCRT supports line delay just like HyperTerm. I don't know of
anything that is in HyperTerm that isn't in SecureCRT. As a side note
SecureCRT really doesn't support true scripting but it can execute a
sequence of commands which is very useful.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Michael Snyder
Sent: Thursday, July 25, 2002 4:39 PM
To: 'Joe'
Cc: ccielab@groupstudy.com
Subject: Ping Scripts with Reflection or SecureCRT?
Well, it's news to me that they aren't using hyperterm anymore.
Hyperterm sucks, but it was a known evil vs. an unknown one.
Here's the rub, I use ping scripts that require about 1100 ms per line.
Will the new terminal programs allow line timing settings? I bet not.
I just downloaded SecureCRT and it doesn't seem to have those settings,
thought It appears to have real scripting support. That has
possibilities.
How about a complete canned script that does ospf. Just thinking.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe
Sent: Thursday, July 25, 2002 5:13 PM
To: 'Michael Snyder'; 'Shaun Wakelen'
Cc: ccielab@groupstudy.com
Subject: RE: Practice with Reflection or Hyperterm???
When I last took the lab, it was with Reflections. And note that we
were
explicitly told NOT to make any settings changes in Reflections, but I
think
that will depend who proctors.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Michael Snyder
Sent: Thursday, July 25, 2002 3:06 PM
To: 'Shaun Wakelen'
Cc: ccielab@groupstudy.com
Subject: Practice with Reflection or Hyperterm???
I'm a bit slow at times.
Is the terminal program now used in the lab, Reflection?
Gee, I'm been using hyperterm forever because they used it in the lab.
So in review,
If I'm taking my lab in RTP next month, I should be using reflection to
practice?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Shaun Wakelen
Sent: Thursday, June 06, 2002 6:41 AM
To: eric ong
Cc: ccielab@groupstudy.com
Subject: RE: Break sequence for Reflection?
Eric
Set-up customised buttons on the toolbar to do the various break
sequences
you have listed. I just use CTRL-^^, CTRL-^x and CTRL-BREAK.
(Setup-Toolbar-Customize, then New Button and ensure you have checked
the
box 'insert special characters using the keyboard'). I also configured
these
on the lab. Takes a few minutes, but well worth it I feel.
Shaun Wakelen
#9007
-----Original Message-----
From: eric ong [mailto:ongyongk@yahoo.com]
Sent: 06 June 2002 12:17
To: ccielab@groupstudy.com
Subject: Break sequence for Reflection?
May I know the break sequence for the Reflection terminal app used in
the
CCIE lab?
Have tried Ctrl-Shift-6, Ctrl-C, Ctrl-Break, Ctrl-Alt-Break,
Ctrl-Shift-Break, etc...
Thanks.
eric
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3