From: Phil (ciscostudent1@xxxxxxxxxxxx)
Date: Fri Jul 26 2002 - 08:54:12 GMT-3
I never really tried that, but my guess is to change the "standby 1 ip x.x.x.x
" in the msfc's that are not the active ones, than change the priority in the a
ctive one lower than the standby one. That would make the standby the active wi
th the new virtual ip address and the active would be now the standby or listen
. You should be able to change the "standby 1 ip x.x.x.x" in this msfc now.
I will try it later.
Phil
kym blair <kymblair@hotmail.com> escreveu: I want to change the IP address on
one of my HSRP groups (on two Catalyst
6509s with dual MSFCs). I have not been able to remove or change the IP
address; when I add an IP address, it accepts it as a secondary, but I
cannot change or remove the original. My solution in a pinch was to reload
the four MSFCs to roll back to my config before I installed HSRP, then I
added in what I wanted. For future reference, how do you remove HSRP from
an interface, or change the IP address?
Thanks, Kym
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:45 GMT-3