From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Wed Jul 24 2002 - 22:01:14 GMT-3
Anyone,
Sorry for the OT, but couldn't find a definitive answer on CCO.
I've got a client who purchased two 6509 switches, one with redundant sup2's
and the other with redundant sup2's with MSFC2's. This was the config
recommended by our Cisco salesperson. Redundant MSFC2's in each switch were
too pricey. Anyway, my question is can I put a sup2/MSFC2 in each switch's
slot one, with the non-MSFC2 in each slot 2? Cisco was intending both
MSFC2's in the same switch, but if I lose that switch totally, I've lost all
inter-VLAN routing. The two switches will be tied together with multiple
(channeled) gig trunks. I was just going to go ahead and try it, but not at
the risk of damaging a supervisor. Does anyone know if this is supported?
Thanks in advance,
Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:42 GMT-3