Re: ISIS NET ID

From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Wed Jul 24 2002 - 19:17:16 GMT-3


   
Chris,

Its not an error message. Its an info saying you should keep the same sys
Id when configuring additional areas.

Harish

                      cmckewon@necbns.c

                      om To: ccielab@groupstudy.com

                      Sent by: cc:

                      nobody@groupstudy Subject: ISIS NET ID

                      .com

                      07/24/2002 01:15

                      PM

                      Please respond to

                      cmckewon

I've gotten a wierd error message when trying to enter the net ID on a
router. Config, command and error listed below. Can anyone provide an
explaination? I haven't got the same error on any other router... just
this
one. By the way... I'm running IOS 12.0(7)T

Thanks,
Chris

r6#show run
Building configuration...

Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r6
!
!
!
!
!
!
ip subnet-zero
!
clns routing
isdn voice-call-failure 0
cns event-service server
!
!
!
!
!
interface FastEthernet0/0
 ip address 150.10.10.1 255.255.255.0
 no ip directed-broadcast
 duplex auto
 speed auto
!
interface Serial0/0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no ip mroute-cache
 frame-relay lmi-type cisco
!
interface Serial0/0.1 point-to-point
 ip address 10.15.1.2 255.255.0.0
 no ip directed-broadcast
 ip router isis
 frame-relay interface-dlci 501
!
interface BRI0/0
 no ip address
 no ip directed-broadcast
 shutdown
 isdn guard-timer 0 on-expiry accept
!
interface FastEthernet0/1
 no ip address
 no ip directed-broadcast
 shutdown
 duplex auto
 speed auto
!
interface Serial0/1
 ip address 150.10.20.1 255.255.255.0
 no ip directed-broadcast
 clockrate 64000
!
router ospf 1
 network 150.10.0.0 0.0.255.255 area 0
!
router isis
!
ip classless
no ip http server
!
!
!
line con 0
 transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end

r6#conf t
Enter configuration commands, one per line. End with CNTL/Z.
r6(config)#router isis
r6(config-router)#net 00.0002.0002.160a.0be0.00
%CLNS: System ID (0200.0216.0A0B.00) must not change when defining
additional area addresses
r6(config-router)#



This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:42 GMT-3