From: P729 (p729@xxxxxxx)
Date: Wed Jul 24 2002 - 03:02:18 GMT-3
FR back-to-back without LMI:
http://www.cisco.com/warp/customer/125/frbacktoback.html
With LMI: http://www.cisco.com/warp/customer/125/frbacktoback_hybrid.html
Regards,
Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "Justin Cook" <Justin.Cook@computerland.co.nz>
To: "Armand D" <ciscoworks2001@yahoo.com>; <ccielab@groupstudy.com>
Sent: Tuesday, July 23, 2002 2:54 PM
Subject: RE: Frame Relay NO Sub-interfaces
> You require a Frame Switch, Back to Back will not work, you require a unit
> to forward the DLCIs (Layer2) between your routers so in essence the Frame
> Relay Switch maps you dlcis between the router/s
>
> Check ou this link, it shows you how to configure a Frame Relay Switch
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_
> c/wcdfrely.htm
>
> --
> Justin Cook
>
>
> -----Original Message-----
> From: Logan, Harold [mailto:loganh@mccfl.edu]
> Sent: Wednesday, 24 July 2002 8:46 a.m.
> To: Armand D; ccielab@groupstudy.com
> Subject: RE: Frame Relay NO Sub-interfaces
>
> I've never done back-to-back FR with frame map statements, try using frame
> interface-dlci instead, and use the same dlci on both routers. Also, you
> need to put 'no keepalive' on both ends.
>
> hth,
>
> Hal
>
> > -----Original Message-----
> > From: Armand D [mailto:ciscoworks2001@yahoo.com]
> > Sent: Tuesday, July 23, 2002 4:01 PM
> > To: ccielab@groupstudy.com
> > Subject: Frame Relay NO Sub-interfaces
> >
> >
> > Hello,
> >
> > I'm wondering if anyone has a sample config for a
> > Frame Relay back to back using no subinterfaces. I
> > have the following configurations on my routers. Both
> > routers show interface status UP DOWN and PVC status
> > inactive.
> >
> >
> > DTE Side:
> >
> > Interface s0
> > encap frame-relay
> > ip add 10.0.0.1 255.255.255.0
> > frame-Relay map ip 10.0.0.2 101 broadcast
> > frame-relay lmi-type cisco
> >
> > DCE Side:
> > Ineterface s0
> > encap frame-relay
> > ip add 10.0.0.2 255.255.255.0
> > Frame-Relay map ip 10.0.0.1 102 broadcast
> > clock rate 128000
> > frame-relay lmi-type cisco
> >
> >
> > Any tips would be great.
> >
> > Thanks,
> >
> > Armand
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3