From: Fred Ingham (fingham@xxxxxxx)
Date: Tue Jul 23 2002 - 18:51:07 GMT-3
Beda: SRB is the default. SRB requires the multiring command on the
router, SRT does not. If there is a requirement to use a RIF use SRB.
Really depends on what you're trying to do.
In the IP config, I use BootP When Needed.
HTH, Fred
----- Original Message -----
From: "beda jain" <bpjain@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 23, 2002 3:39 PM
Subject: token ring question
> Hi,
>
> when i should use SRB and when i should use SRT in trcrf configuration
> for bridging mode.
>
> In ip configuration what shoild be in ip state( Bootp always or Bootp when
> needed.
>
> Thanks,
> Beda
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:41 GMT-3