From: Todd Carswell (acarswell@xxxxxxxxx)
Date: Tue Jul 23 2002 - 10:32:22 GMT-3
Thanks to all for the response to my post.
I'm using 2500s in my test bed, and I've been told that MPLS will not
run on anything less than a 2600. That just saved me a lot of
frustration! We've got some 2600s in our lab, so I'll switch over to those.
Again, many thanks to those who took the time to help me out.
Todd Carswell
Paul Jin wrote:
>What type of router are you using to run mpls?
>
>It is not supported on the lower/older routers.
>
>- Paul
>
>
>-----Original Message-----
>From: Todd Carswell [mailto:acarswell@nc.rr.com]
>Sent: Monday, July 22, 2002 11:21 AM
>To: ccielab@groupstudy.com
>Subject: OT - MPLS capabilities in IOS
>
>All,
>
>I'm currently running IOS 12.1(5)T9, but it doesn't seem to have MPLS
>capabilities. I get the "unrecognized command" output from the CLI when
>I try to type in the basic "tag switching" commands.
>
>Here's my question: Does IOS 12.1.16 with the "Service Provider" feature
>set allow full MPLS functionality?
>
>I've searched the cisco web site for the answer, but I haven't had any
>luck yet.
>
>Before anyone sends any flames my way... I know that MPLS is not on the
>R&S lab exam. That's why I designated this message as OT.
>
>Thx
>
>Todd Carswell
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:40 GMT-3