From: Ouellette, Tim (tim.ouellette@xxxxxxx)
Date: Tue Jul 23 2002 - 05:11:41 GMT-3
Check this out for the config-register. Does this help?
Bit No. Hex Meaning
00-03 0x0000-0x000F Boot Field Parameters
0x0000 Stays at the system bootstrap prompt
0x0001 Boots system image on EPROM
0x0002-0x000F Specifies a default netboot filename
06 0x0040 Ignore NVRAM contents
07 0x0080 Disable boot messages
08 0x0100 Break disabled
10 0x0400 IP broadcast with all zeros
11-12 0x0800-0x1000 Console line speed
13 0x2000 Boot default ROM software if network boot fails
14 0x4000 IP broadcasts do not have net numbers
15 0x8000 Enable diagnostic messages and ignore NVRAM contents
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: Tuesday, July 23, 2002 3:24 AM
To: ccielab@groupstudy.com
Subject: Register 's configuration
Hi, group
I am setting the software register of the router, but I
couldn't set the result that I hoped. For example, it is
0x2318 now, if I use the
config-register 0x2102
I will get the 0x441A in the show version. It is always
make a addition with the data I set, I always couldn't get
the result I directly set. Why?
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:40 GMT-3