ibgp Loadbalancing

From: Yadav, Arvind K (CAP, GECIS) (Arvind.Yadav@xxxxxxxxxxxx)
Date: Tue Jul 23 2002 - 03:49:20 GMT-3

• Next message: P729: "Re: Can you bridge IP with Translational Bridging?"
• Previous message: Donny MATEO: "RE: OSPF keeps bringing up DDR across asyn line"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Is there any way to have loadbalabcing on ibgp peering.

     S1 AS100 S2
        | |
 eBGP | | eBGP
      | |
        R1------- R2
         \ ibgp /
  ibgp \ / ibgp
           \ /
             R3

           As 200

R3 is receiving routes from both the ibgp peers R1 and R2.
All the traffic form R3 is going to R1. Is there any to achive loadbalanced the
 traffic to R1 and R2.

Maximum-path command only work with eBGP routes not iBGP.

*******************************************************************************
R3 #sh ip bgp 20.10.0.0
BGP routing table entry for 20.10.0 /16, version 122312
Paths: (2 available, best #2, table Default-IP-Routing-Table)
  Not advertised to any peer
  80
    R2 (metric 2306560) from 10.2.2.2
      Origin IGP, metric 4294967294, localpref 100, valid, internal
  80
    R1 (metric 2306560) from 10.1.1.1
      Origin IGP, metric 4294967294, localpref 100, valid, internal, best

Regards
Arvind

• Next message: P729: "Re: Can you bridge IP with Translational Bridging?"
• Previous message: Donny MATEO: "RE: OSPF keeps bringing up DDR across asyn line"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:40 GMT-3