From: Omer Ansari (omer@xxxxxxxxxx)
Date: Mon Jul 22 2002 - 19:38:36 GMT-3
Mike,
to my humble knowledge, a working configuration such as this should work.
unless a pro gets up and slaps me silly, care to share the relevant
configs?
On Mon, 22 Jul 2002, Michael Snyder wrote:
> I wanted to load a ios image to one of my routers with a token ring
> interface, but my TFTP server only had ethernet interfaces. I thought I
> would try a translational bridge on my ags to connect the two.
>
> Well, I never could get a ping to work across the bridge thought all my
> show commands on the ags looked like the bridge was functional.
>
> I understand that DLSW can only circuit switch SNA and Netbios (LLC2),
> is it safe to assume that Translational Bridging has the same
> limitations?
>
> OTHO, if I'm wrong, is there any special settings needed on a token ring
> switch to allow it to work?
>
> My topology was:
>
> (PC)--->EO)(AGS)(To0)---->(Token Switch)--->(To0)(2525)
>
> I could ping from the 2525 to the token switch, but not beyond it. The
> PC TFTP server had worked with other Ethernet routers that night.
>
>
> Thanks in Advance,
>
> Michael
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:39 GMT-3