From: Lekan Magbagbeola (lekkyl@xxxxxxxxxxx)
Date: Sat Jul 20 2002 - 05:39:32 GMT-3
Hi Micheal,
There are two you can get this done, the first being from the vlan
configuration mode and the other option is to do it from vtp global
configuration mode.
With the first option, you access by entering the "vlan database" privileged
EXEC command. From there do "?" and you'll see all the options available to
configure vtp options.
With the second option, enter into global configuration mode and type "vtp"
followed by question mark "?" and you'll see all the available options.
I hope this helps.
Lekan
For the first option, try typing
>From: "Michael Snyder" <msnyder@ldd.net>
>Reply-To: "Michael Snyder" <msnyder@ldd.net>
>To: <ccielab@groupstudy.com>
>Subject: 3550 VTP commands.
>Date: Thu, 18 Jul 2002 22:37:45 -0500
>
>Trying to setup my 3550 as a VTP client.
>
>I have it trunking to an old 5002 and that works fine. It pulls in, the
>correct vtp and vlan info from the 5002 for the vtp domain I'm using.
>
>I wanted to fine tune some vtp settings but can't figure out how. The
>only mls option I can find is a qos command, and also the only vtp
>command I can find is a file info storage location command.
>
>???
>
>Thanks in Advance
>
>Michael
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:37 GMT-3