From: Cary Anderson (cary@xxxxxxxxx)
Date: Fri Jul 19 2002 - 18:08:33 GMT-3
Can you use the MFT ports on 3810's in a back to back ATM configuration?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ademola Osindero
Sent: Friday, July 19, 2002 2:07 PM
To: Gayou, Jeremy; 'Mark Vann'; ccielab@groupstudy.com
Subject: RE: cheap atm lab for r&s
Jeremy,
The slightest mark counts even if it's just 1 point. I was praying
during
my last lab attempt looking for few sections i could garner may be 1 or
2
points here and there to sum up to 80marks.... And by the way can you do
ATM CLIP with your ATM interfaces connected back-to-back?
Regards,
Ademola
At 11:10 AM 7/19/2002 -0700, Gayou, Jeremy wrote:
>Mark,
>
>You don't need an 1s1010 because that config is not part of the lab.
What I
>have is 2 4500 with ATM OC3 cards in a back to back configuration. But
even
>that is really costly so a practice lab would be better because ATM is
not a
>big part of the lab. Thanks
>
>Jeremy
>
>-----Original Message-----
>From: Mark Vann [mailto:linuxmanvan@yahoo.com]
>Sent: Thursday, July 18, 2002 2:28 PM
>To: ccielab@groupstudy.com
>Subject: cheap atm lab for r&s
>
>
>Hey all, i need a ls1010 and two or three routers to
>practice basic atm for the lab. This is the only stuff
>i dont have in my home lab. Is there someone that has
>affordable , ie cheap , lab access that i can use for
>a few days if that long?
>Thanks
>
>=====
>Mark Vann
>CCNP, CCNA, CCDA, MCSE, Network+
>Network Engineer
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:37 GMT-3