From: MADMAN (dave@xxxxxxxxxxxxxx)
Date: Thu Jul 18 2002 - 16:04:28 GMT-3
Yes you can, you configure NAT in conjuncton with route maps to
provision multiple outside interfaces.
Dave
Tom Larus wrote:
>
> Can you set up more than one outside interface, or can NAT only be done from
> one inside interface to one outside interface? It's not like there is
> always going to be only one way out to the rest of the network on the one
> router doing NAT. I have a bri int and two FR subints that traffic from the
> private internal network could need to use to reach the rest of the network,
> so I can't just put "ip nat outside" on one of the fr subints and feel like
> I have done things right.
>
> I looked at the 12.1 IOS docs, and there were no examples with more than one
> outside interface.
>
> I tried using a loopback as the outside interface. No go.
>
> Thanks in advance.
>
> Tom Larus
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:35 GMT-3