From: Tom Larus (tlarus@xxxxxxx)
Date: Thu Jul 18 2002 - 14:46:54 GMT-3
Can you set up more than one outside interface, or can NAT only be done from
one inside interface to one outside interface? It's not like there is
always going to be only one way out to the rest of the network on the one
router doing NAT. I have a bri int and two FR subints that traffic from the
private internal network could need to use to reach the rest of the network,
so I can't just put "ip nat outside" on one of the fr subints and feel like
I have done things right.
I looked at the 12.1 IOS docs, and there were no examples with more than one
outside interface.
I tried using a loopback as the outside interface. No go.
Thanks in advance.
Tom Larus
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:35 GMT-3