From: ccie candidate (ccie1@xxxxxxxxx)
Date: Thu Jul 18 2002 - 11:04:43 GMT-3
Yakut ;
your first statement is right , redist between EIGRP and IGRP with the same AS
number should follow the same rules of redistribution ,the difference is that i
t is done automatically .
your first rule is also right ,IGRP was not supposed to see the variable subnet
s in the EIGRP domain ( and my question was why EIGRP summarized them so that I
GRP see them as for example /24 mask while they were /28 on the EIGRP domain )
your 2) rule is wrong , auto summary is not meant for that , auto summary will
not allow the EIGRP router to send variably subnets from any major class networ
k
i didnt understand your last rule , however ip summary address command is to su
mmarize EIGRP domain to external protocols and not the other way around -:)
now back to my question , WHY the routes appeard on the IGRP domain summarized
while i disable all summarization on EIGRP ??
--On Thu, 18 Jul 2002 23:37:20 yakout esmat wrote: >Redistribution between EIGRP/IGRP using the same AS number follow the same >rules as any normal redistribution between VLSM/FLSM. > >1) If both protocols using the same major nework but different masks, then >IGRP will not see the networks with different subnets than its own. > >2) when you diable auto-summary in EIGRP, that only applies to routes >redistributed from IGRP (or any other protocol) into EIGRP and not the other >way around. > >3) You can use the interface summary-address command if you wanted to send >summary to next neighbor > >HTH > >Yakout > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of >ccie candidate >Sent: Thursday, July 18, 2002 10:30 PM >To: ccielab@groupstudy.com >Subject: EIGRP /IGRP > > >guys ; >i have a scenario where EIGRP and IGRP are having the same AS number and >reditributing autmatically , the EIGRP domain have different subnets >(masks) . >i disabled the auto-summary on all routers in eigrp domain including the >redist point ,however the routers in IGRP domain can see all the routes in >EIGRP domain as if EIGRP summarized them . > >am i supposed to do this manually on EIGRP by using the summary address >command ??? as per doyle vol 1 ? > >what am i missing here ? > > >candidate > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:35 GMT-3