From: Anthony Pace (anthonypace@xxxxxxxxxxx)
Date: Wed Jul 17 2002 - 20:27:37 GMT-3
It is also sometimes desirable to have redundancy across the multiple
redistribution points in which case you may not want to filter the
routes but just "prefer" some routes from one domain over another.
Anthony Pace
n Wed, 17 Jul 2002 13:36:48 -0500, "Brian McGahan"
<brian@cyscoexpert.com> said:
> Beda,
>
> It all depends on what the requirements of the scenario are,
> such as redundancy, optimal routing, etc. There's nothing wrong with
> having multiple points of mutual redistribution, as long as you filter
> your routes properly to prevent loops.
>
> HTH
>
> Brian McGahan, CCIE #8593
> Director of Design and Implementation
> brian@cyscoexpert.com
>
> CyscoExpert Corporation
> Internetwork Consulting & Training
> http://www.cyscoexpert.com
> Voice: 847.674.3392
> Fax: 847.674.2625
>
>
> -----Original Message-----
> From: beda jain [mailto:bpjain@cisco.com]
> Sent: Wednesday, July 17, 2002 1:30 PM
> To: Brian McGahan; 'beda jain'; 'Brian McGahan'
> Cc: ccielab@groupstudy.com
> Subject: RE:
>
>
> Hi,
>
> In r2 and r3 both igrp and ospf are running.
> so i want to redistribute ospf to igrp to pass ospf router to r1 and
> vise
> versa.
> So i can do this by doing mutual redistribution in r2 or r3 not both.
> I real lab i have to do mutual redistribution in both r2 and r3 or not.
> Thanks,
> Beda
>
> At 12:39 PM 7/17/2002 -0500, Brian McGahan wrote:
> >Beda,
> >
> > Could you please try to clarify your question some more? I'm
> >not really sure what you're asking.
> >
> >Thanks,
> >
> >Brian McGahan, CCIE #8593
> >Director of Design and Implementation
> >brian@cyscoexpert.com
> >
> >CyscoExpert Corporation
> >Internetwork Consulting & Training
> >http://www.cyscoexpert.com
> >Voice: 847.674.3392
> >Fax: 847.674.2625
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >beda jain
> >Sent: Wednesday, July 17, 2002 10:59 AM
> >To: Brian McGahan
> >Cc: ccielab@groupstudy.com
> >Subject:
> >
> >Hi Brian,
> >
> > r1
> > |
> >r5-r2------|--------r3--------r4
> >
> >there are three link. r1 and r2, r1 and r3 and r2 and r3 .
> >
> >
> >r1, r2 and r3 are running igrp,
> >
> >r2 ,r3 ,r4 and r5 are running ospf
> >
> >do we need to do mutual redistribute in r2 and r3 or only r2 or r3 will
> >be ok.
> >
> >Thanks,
> >Beda
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:34 GMT-3