From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Wed Jul 17 2002 - 08:22:49 GMT-3
Perhaps there would be more to your question.. but why cant u use a simple
interface atm1/0.1 point-to-point
ip address 10.1.1.1 255.255.255.240
pvc x/y
encapsulation aal5snap / aal5mux
protocol ip 10.1.1.2 broadcast
interface atm1/0.2/.....
and so on..
from CCO : "If you specify a protocol-address instead of inarp, Inverse ARP
is automatically disabled for that protocol."
As I said, your question could be too simple, or it could be deeper...
thoughts ??
rgds
Nick
----- Original Message -----
From: Mayande P.Gowon <bustahnet@usa.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, July 17, 2002 7:06 PM
Subject: Avoiding inverse arp on ATM p2p
> Dear Group,
>
> Simple question perhaps. How can I avoid inverse arp on an ATM
point-to-point
> interface? I tried the map-group command but got:
> ATM: cannot configure map-group on point-to-point sub-interface.
>
> Thanks,
> Mayande
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:34 GMT-3