From: kris.keen@xxxxxxxxxx
Date: Wed Jul 17 2002 - 00:38:40 GMT-3
Hi All,
Just a little 'nice to have' which I'm sure some of you already are
running. I have my Cisco rack at home, I'm using a Smoothwall linux box to
port forward telnet requests to my home network which is housing a Cisco
2511. The 2511 runs a private address. When I telnet to the public ip
address on the firewall, it shoots it out via telnet to my Cisco 2511
(using port forwarding) and away I go.. Telnet access works fine..
However, behind the firewall at work, those ports are of course blocked (80
is let through) so my procedure doesnt work. What I'm thinking of is using
SSH on my Cisco 2511 to listen on port 80 if at all possible, I could then
SSH out from my work pc through the firewall on port 80, it hits the
Smoothwall firewall, port fowards 80 to port 80 behind the firewall using
SSH and away I go :)
Are you still with me? :)
Question, Can I setup a Cisco 2511 to listen using SSH on port 80 instead
of plain old telnet? I'm running 12.1 IOS with 16/16 on the Router.
Objective is to lab stuff up at home from work.
Ideas?
Cheers
-----------------------------------------------------------------
Kris Keen - CCNP, CCDP, CNE
Network Support Specialist - Network Systems
Aon Risk Services Australia Limited
(612) 9253 7272
0404862970
E: Kris.Keen@aon.com.au
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:33 GMT-3