From: Louis Young (tonyblair@xxxxxxxxx)
Date: Tue Jul 16 2002 - 02:24:32 GMT-3
there is a link on the technical tips on cisco.com
pls try it.
----- Original Message -----
From: "Ademola Osindero" <osindero@lagos.sns.slb.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, July 16, 2002 12:57 PM
Subject: OSPF routes in database not in route table
> Hi group,
>
> Can there be any reason why a route existing in an OSPF database will not
> be installed in the route table?
>
> While practicing Cyscoexeprt lab, I mad routers r2, r5 and r6 to have ip
> ospf net non-broadcast and also configured there neighbors' addresses. This
> was all in the quest to modify the dead interval to 120seconds. But
> apparently no ospf route was installed on r2 except for routes emanating
> from r1. Could there be any reason for this?
>
> Regards,
>
> Osindero Ademola
> Schlumberger Network Solutions
> Tel: 234 1 261 0446 Ext 5427
> Fax 234 1 262 1034
> email:osindero@lagos.sns.slb.com
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:31 GMT-3