From: Dotun Oni (dot_oni@xxxxxxxxxxx)
Date: Mon Jul 15 2002 - 20:44:14 GMT-3
Try this:
dial-peer voice 10 ......
destination-pattern 377[7,8]
.......
preference 0
dial-peer voice 20 ......
destination-pattern 377[7,8]
.......
preference 1
The above should put dial-peer 10 and 20 in a hunt group. If the first
doesn't answer, the second rings. Let me know if it works.
HTH
>From: "Mike Thompson" <mikethomp601@hotmail.com>
>Reply-To: "Mike Thompson" <mikethomp601@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: Voice problem
>Date: Mon, 15 Jul 2002 04:12:49 +0000
>
>hi,
>I am trying to configure this problem on cisco routers.
>I have 2 voice routers and each one has 2 fxs ports.
>The phone number of r1 is 2212
>The 2 phones numbers of r2 are 377 and 3778
>If user 1 (phone 2212) dials 3777, if 3777 does not answer or fails then
>the router automatically dials 3778.
>All week-end I check on cisco website and I come up with a answer.
>Any help will be appreciated.
>regards
>Mike
>
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:31 GMT-3