From: Desimone, Aurelio (ADesimone@xxxxxxxxx)
Date: Mon Jul 15 2002 - 15:37:35 GMT-3
You can only filter by mac address on a layer 2 switch. The ip permit list
is only relevant for telnet/snmp access.
Aurelio
-----Original Message-----
From: Graham, John [mailto:john.graham@cgey.com]
Sent: Monday, July 15, 2002 6:49 AM
To: 'ccielab@groupstudy.com'
Subject: IP access via a port
Hi,
In a scenario I have to restrict access to a port that is in a public place
on a switch to a single IP and MAC address.
I have implemented port security and locked it down to the relevant MAC
address and used mac-address exclusive.
I have also tried to implement the IP permit list.
How do you apply it to the relevant port ? Or am I barking up the wrong tree
?
Regards,
John.
****************************************************************************
****************
" This message contains information that may be privileged or confidential
and
is the property of the Cap Gemini Ernst & Young Group. It is intended only
for
the person to whom it is addressed. If you are not the intended recipient,
you
are not authorized to read, print, retain, copy, disseminate, distribute, or
use
this message or any part thereof. If you receive this message in error,
please
notify the sender immediately and delete all copies of this message ".
****************************************************************************
****************
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:31 GMT-3