Default route over ISDN

From: Yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Mon Jul 15 2002 - 11:01:06 GMT-3

   
Any body aware of this problem..

Scenario:

10.1.1.1/24--[R1]------(192.168.1.0/24)-----[R2]----
                                     ISDN

1) R2 is configured with a static default route

Problem:

1) If the default static route on R2 is pointing to BRI0 interface "ip route
0.0.0.0 0.0.0.0 bri0", R2 can't ping 10.1.1.1 on R1. Getting "encapsulation
failed" error when debuging ip packets, and R2 can't initiate a dial.

2) If I cahnge the default to point to next hop instead "ip route 0.0.0.0
0.0.0.0 192.168.1.1", every thing is sweet

IOS 12.1, legacy ISDN with single dialer map statement is used, IP classless
is on...

I must be missing some thing.

Thanks

Yakout

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:30 GMT-3