From: Dotun Oni (dot_oni@xxxxxxxxxxx)
Date: Sun Jul 14 2002 - 22:04:33 GMT-3
Sample config:
dial-peer voice 10 pots
destination-pattern 222
port 1/0/0
preference 0
dial-peer voice 20 pots
destination-pattern 222
port 1/0/1
preference 2
dial-peer voice 30 pots
destination-pattern 222
port 1/1/0
preference 1
The dial-peer with the lowest preference number takes precedence (0 is
highest). i.e. dial-peer 10,30 then 20
HTH
>From: "Cisco Kid" <cisco@certifiednets.com>
>Reply-To: "Cisco Kid" <cisco@certifiednets.com>
>To: <e-oppong@attbi.com>, <ccielab@groupstudy.com>, <pita40@hotmail.com>
>Subject: RE: dial peer voip
>Date: Sun, 14 Jul 2002 14:12:53 -0600
>
>Is this correct?
>
> >>> "Emmanuel Oppong" <e-oppong@attbi.com> 05/29/02 03:13PM >>>
>The peer with the higher voip preference is prefered.
>
>Rough example:
>
>dial-peer voice 3 voip
>preference 2
>!
>dial-peer voice 4 voip
>preference 5
>!
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>peter brown
>Sent: Wednesday, May 29, 2002 1:16 PM
>To: ccielab@groupstudy.com
>Subject: dial peer voip
>
>
>Hello,
>
>If you have 2 or more dial peer on a router How do you set priority on dial
>peer to specify which peer has priotity over the other when phone call
>comes
>in. This is not priority for voice over data.
>
>Help
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:30 GMT-3