From: kym blair (kymblair@xxxxxxxxxxx)
Date: Sun Jul 14 2002 - 11:15:49 GMT-3
David,
Assuming your speaker is directly connected to R2 via E0 and you want to
make R2 your redezvous-point, I think you need to put (in global) on R2 (not
R3):
ip pim send-rp-announce E0 scope 16 [group-list 25]
ip pim send-rp-discovery scope 16
[access-list 25 permit 224.2.2.2]
Would also need on R2 E0:
ip igmp join-group 224.2.2.2
Let me know whether that worked. I've very interested in knowing the
solution! Thanks,
Kym
>From: "David Ham" <ccieau@hotmail.com>
>Reply-To: "David Ham" <ccieau@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: Multicast Help!!
>Date: Sun, 14 Jul 2002 17:25:50 +1000
>
>Hi all,
>
>I have multicast question which drive me crazy.
>
>The scenario is as follows,
>
>
>
>R4-s0.1--(FR)----s0.1--R3-s1------s0-R2
>|
>s0.2
>|\
>| \
>(FR)
>| \
>s0 s0
>R5 R6
>
>
>R4 s0.1 is frame subinterface point-to-point
>R4 s0.2 is frame multpoint
>
>IP connectivity is fine.
>
>At R2
>IP igmp join 224.2.2.2 at serial 0
>
>I applied
>R2 s0, ---- ip pim spare-mode
>R3 s1 =ip pim spare-mode, s0.1 = ip pim spare-mode + ip pim nbma-mode
>R4 s0.1,s0.2 = ip pim spare-mode + ip pim nbma-mode
>R5 s0 = ip pim spare-mode + ip pim nbma-mode
>R6 s0 = ip pim spare-mode + ip pim nbma-mode
>
>I add ip pim send-auto-announce s0.1 scope 15 at R3
>and
>
>add ip pim send-auto-discovery s 0.2 scope 15 at R4
>
>but I am unable to make ping 224.2.2.2 from R6, R5
>
>
>I manage to work out with static RP but I couln't work out with AUTO-RP
>
>Anyone have any idea ??
>
>
>
>
>Regards,
>David Ham
>
>
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:29 GMT-3