From: IPSec (ipsec@xxxxxxxxxxxxx)
Date: Sun Jul 14 2002 - 03:12:16 GMT-3
it's in non-cannonical format already.
-----Original Message-----
From: "Nick Shah" <nshah@connect.com.au>
To: "IPSec" <ipsec@myrealbox.com>, <ccielab@groupstudy.com>
Date: Sun, 14 Jul 2002 16:06:10 +1000
Subject: Re: Cyscoexpert Official Configs
Wont the MAC address have to be bit swapped ??
Nick
----- Original Message -----
From: IPSec <ipsec@myrealbox.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, July 14, 2002 3:12 PM
Subject: Cyscoexpert Official Configs
> Hi Group,
>
> Here are the official lab solutions:
>
> TermServ-34>1
> [Resuming connection 1 to rack3r1 ... ]
>
> R1#sh run
> Building configuration...
>
>
>
> Current configuration : 2014 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R1
> !
> enable password cisco
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0001.0001.0001
> !
> !
> dlsw local-peer peer-id 150.1.1.1
> dlsw remote-peer 0 tcp 150.1.3.3
> dlsw icanreach mac-exclusive
> dlsw icanreach mac-address 7145.a0e3.0000 mask ffff.ffff.0000
> dlsw bridge-group 1
> !
> interface Loopback0
> ip address 150.1.1.1 255.255.255.0
> ipx network 1
> !
> interface Loopback1
> ip address 220.1.0.1 255.255.255.0
> !
> interface Loopback2
> ip address 220.1.1.1 255.255.255.0
> !
> interface Loopback3
> ip address 220.1.2.1 255.255.255.0
> !
> interface Loopback4
> ip address 220.1.3.1 255.255.255.0
> !
> interface Loopback10
> ip address 195.1.1.1 255.255.255.0
> !
> interface Ethernet0
> ip address 150.1.10.1 255.255.255.0
> ipx network 10
> bridge-group 1
> !
> interface Serial0
> ip address 150.1.14.1 255.255.255.0
> ip summary-address eigrp 100 220.1.0.0 255.255.252.0 5
> ipx network 14
> no fair-queue
> clockrate 2000000
> !
> interface Serial1
> ip address 150.1.12.1 255.255.255.0
> ipx network 12
> clockrate 2000000
> !
> interface TokenRing0
> no ip address
> shutdown
> !
> router eigrp 100
> network 150.1.14.1 0.0.0.0
> network 220.1.0.0 0.0.3.255
> auto-summary
> no eigrp log-neighbor-changes
> !
> router ospf 1
> router-id 150.1.1.1
> log-adjacency-changes
> area 12 nssa
> network 150.1.1.1 0.0.0.0 area 12
> network 150.1.12.1 0.0.0.0 area 12
> !
> router bgp 1
> bgp log-neighbor-changes
> network 195.1.1.0
> neighbor 150.1.12.2 remote-as 256
> neighbor 150.1.14.4 remote-as 34
> neighbor 150.1.14.4 route-map PREPEND out
> !
> ip classless
> ip http server
> !
> !
> ip prefix-list R1_LOOPBACK seq 5 permit 195.1.1.0/24
> route-map PREPEND permit 10
> match ip address prefix-list R1_LOOPBACK
> set as-path prepend 1 1
> !
> route-map PREPEND permit 20
> !
> !
> !
> !
> !
> bridge 1 protocol ieee
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
> R1#
> TermServ-34>2
> [Resuming connection 2 to rack3r2 ... ]
>
> R2#sh run
> Building configuration...
>
> Current configuration : 2171 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R2
> !
> enable password cisco
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0002.0002.0002
> ipx internal-network 2222
> !
> !
> !
> interface Loopback0
> ip address 150.1.2.2 255.255.255.0
> ipx network 2
> !
> interface Loopback10
> ip address 195.1.2.2 255.255.255.0
> !
> interface Tunnel0
> ip address 150.1.24.2 255.255.255.0
> ipx network 24
> tunnel source Loopback0
> tunnel destination 150.1.4.4
> !
> interface Ethernet0
> ip address 150.1.222.2 255.255.255.0
> no ip redirects
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network point-to-multipoint
> ipx network 222
> ipx nlsp enable
> standby 1 ip 150.1.222.1
> standby 1 priority 50
> standby 1 preempt
> standby 1 track Serial0 50
> !
> interface Serial0
> ip address 150.1.12.2 255.255.255.0
> ipx network 12
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> router eigrp 100
> redistribute ospf 1 metric 1 1 1 1 1
> network 150.1.24.2 0.0.0.0
> auto-summary
> no eigrp log-neighbor-changes
> !
> router ospf 1
> router-id 150.1.2.2
> log-adjacency-changes
> area 0 authentication
> area 12 nssa
> area 51 authentication message-digest
> area 51 virtual-link 150.1.5.5 authentication-key cisco
> redistribute eigrp 100 subnets
> network 150.1.2.2 0.0.0.0 area 51
> network 150.1.12.2 0.0.0.0 area 12
> network 150.1.222.2 0.0.0.0 area 51
> !
> router bgp 256
> no synchronization
> bgp log-neighbor-changes
> network 195.1.2.0
> neighbor 150.1.4.4 remote-as 34
> neighbor 150.1.4.4 ebgp-multihop 255
> neighbor 150.1.4.4 update-source Loopback0
> neighbor 150.1.12.1 remote-as 1
> neighbor 150.1.12.1 route-map LOCALPREF in
> neighbor 150.1.222.6 remote-as 256
> !
> ip classless
> ip http server
> !
> !
> ip prefix-list R3_LOOPBACK seq 5 permit 195.1.3.0/24
> route-map LOCALPREF permit 10
> match ip address prefix-list R3_LOOPBACK
> set local-preference 200
> !
> route-map LOCALPREF permit 20
> !
> !
> !
> !
> ipx router nlsp
> area-address 0 0
> !
> !
> ipx router rip
> no network 222
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
> R2#
> TermServ-34>3
> [Resuming connection 3 to rack3r3 ... ]
>
> R3#sh run
> Building configuration...
>
>
>
> Current configuration : 1973 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R3
> !
> enable password cisco
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0003.0003.0003
> !
> !
> dlsw local-peer peer-id 150.1.3.3
> dlsw remote-peer 0 tcp 150.1.1.1
> dlsw remote-peer 0 frame-relay interface Serial0 304
> dlsw icannotreach sap F0
> dlsw bridge-group 1
> !
> interface Loopback0
> ip address 150.1.3.3 255.255.255.0
> ipx network 3
> !
> interface Loopback10
> ip address 195.1.3.3 255.255.255.0
> !
> interface Serial0
> ip address 150.1.111.3 255.255.255.248
> encapsulation frame-relay
> ip ospf authentication-key cisco
> ip ospf priority 255
> ipx network 111
> no ipx split-horizon eigrp 11
> no arp frame-relay
> frame-relay map llc2 304 broadcast
> frame-relay map ip 150.1.111.4 304 broadcast
> frame-relay map ip 150.1.111.5 305 broadcast
> frame-relay map ipx 111.0004.0004.0004 304 broadcast
> frame-relay map ipx 111.0005.0005.0005 305 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface Ethernet0
> ip address 150.1.30.3 255.255.255.0
> ipx network 30
> bridge-group 1
> !
> interface BRI0
> no ip address
> shutdown
> isdn x25 static-tei 0
> !
> router ospf 1
> router-id 150.1.3.3
> log-adjacency-changes
> area 0 authentication
> redistribute connected subnets route-map CONNECTED
> network 150.1.3.3 0.0.0.0 area 0
> network 150.1.111.3 0.0.0.0 area 0
> neighbor 150.1.111.5
> neighbor 150.1.111.4
> !
> router bgp 34
> no synchronization
> bgp log-neighbor-changes
> network 195.1.3.0
> neighbor 150.1.111.4 remote-as 34
> !
> ip classless
> ip http server
> !
> route-map CONNECTED permit 10
> match interface Ethernet0
> !
> !
> !
> !
> ipx router eigrp 11
> network 111
> !
> !
> ipx router rip
> no network 111
> !
> !
> !
> bridge 1 protocol ieee
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
> R3#
> TermServ-34>4
> [Resuming connection 4 to rack3r4 ... ]
>
> R4#sh run
> Building configuration...
>
>
>
> Current configuration : 3401 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R4
> !
> enable password cisco
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0004.0004.0004
> !
> !
> dlsw local-peer peer-id 150.1.4.4
> dlsw remote-peer 0 frame-relay interface Serial0 403
> dlsw bridge-group 1
> !
> interface Loopback0
> ip address 150.1.4.4 255.255.255.0
> ipx network 4
> !
> interface Loopback10
> ip address 195.1.4.4 255.255.255.0
> !
> interface Tunnel0
> ip address 150.1.24.4 255.255.255.0
> ipx network 24
> ipx output-sap-filter 1001
> tunnel source Loopback0
> tunnel destination 150.1.2.2
> !
> interface Ethernet0
> ip address 170.1.1.1 255.255.255.0
> ipx input-sap-filter 1000
> ipx network 1000
> bridge-group 1
> !
> interface Serial0
> ip address 150.1.111.4 255.255.255.248
> encapsulation frame-relay
> ip ospf authentication-key cisco
> ip ospf priority 0
> ipx network 111
> ipx output-sap-filter 1001
> no arp frame-relay
> frame-relay map llc2 403 broadcast
> frame-relay map ip 150.1.111.3 403 broadcast
> frame-relay map ip 150.1.111.5 403 broadcast
> frame-relay map ipx 111.0003.0003.0003 403 broadcast
> frame-relay map ipx 111.0005.0005.0005 403 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial1
> ip address 150.1.14.4 255.255.255.0
> ipx network 14
> ipx output-sap-filter 1001
> !
> interface BRI0
> no ip address
> shutdown
> isdn x25 static-tei 0
> !
> router eigrp 100
> redistribute rip metric 1 1 1 1 1
> network 150.1.14.4 0.0.0.0
> network 150.1.24.4 0.0.0.0
> auto-summary
> no eigrp log-neighbor-changes
> !
> router ospf 1
> router-id 150.1.4.4
> log-adjacency-changes
> area 0 authentication
> redistribute rip subnets route-map RIP2OSPF
> network 150.1.4.4 0.0.0.0 area 0
> network 150.1.111.4 0.0.0.0 area 0
> distance 171 0.0.0.0 255.255.255.255 1
> !
> router rip
> timers basic 10 60 60 80
> network 170.1.0.0
> !
> router bgp 34
> no synchronization
> bgp log-neighbor-changes
> network 195.1.4.0
> neighbor 150.1.2.2 remote-as 256
> neighbor 150.1.2.2 ebgp-multihop 255
> neighbor 150.1.2.2 update-source Loopback0
> neighbor 150.1.2.2 route-map MED out
> neighbor 150.1.14.1 remote-as 1
> neighbor 150.1.14.1 route-map MED out
> neighbor 150.1.111.3 remote-as 34
> neighbor 150.1.111.3 route-map MED out
> neighbor 170.1.1.254 remote-as 100
> neighbor 170.1.1.254 route-map NO-EXPORT in
> !
> ip classless
> ip http server
> ip as-path access-list 1 permit _1000_
> ip as-path access-list 2 permit ^100_
> !
> !
> ip access-list standard EVEN_SECOND_OCTET
> permit 0.0.0.0 255.254.255.255
> ip access-list standard ODD_THIRD_OCTET
> permit 0.0.1.0 255.255.254.255
> access-list 1 permit 150.1.30.0
> access-list 1000 deny FFFFFFFF 4
> access-list 1000 permit FFFFFFFF
> access-list 1001 deny 1.0000.0000.0000 FFFFFFFE.ffff.ffff.ffff 7
> access-list 1001 permit FFFFFFFF
> route-map NO-EXPORT permit 10
> match as-path 1
> set community no-export
> !
> route-map NO-EXPORT permit 20
> !
> route-map MED permit 10
> match ip address ODD_THIRD_OCTET
> match as-path 2
> set metric 31337
> !
> route-map MED permit 20
> !
> route-map RIP2OSPF permit 10
> match ip address EVEN_SECOND_OCTET
> set metric 1000
> !
> route-map RIP2OSPF permit 20
> set metric-type type-1
> !
> !
> !
> !
> ipx router eigrp 11
> network 111
> !
> !
> ipx router rip
> no network 111
> !
> !
> !
> bridge 1 protocol ieee
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
> R4#
> TermServ-34>5
> [Resuming connection 5 to rack3r5 ... ]
>
> R5#sh run
> Building configuration...
>
> Current configuration : 2019 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R5
> !
> enable password cisco
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ipx routing 0005.0005.0005
> ipx internal-network 5555
> !
> !
> !
> interface Loopback0
> ip address 150.1.5.5 255.255.255.0
> ipx network 5
> !
> interface Loopback10
> ip address 195.1.5.5 255.255.255.0
> !
> interface Ethernet0
> ip address 150.1.222.5 255.255.255.0
> no ip redirects
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network point-to-multipoint
> ipx network 222
> ipx nlsp enable
> standby 1 ip 150.1.222.1
> standby 1 preempt
> standby 1 track Serial0 100
> !
> interface Serial0
> ip address 150.1.111.5 255.255.255.248
> encapsulation frame-relay
> ip ospf authentication-key cisco
> ip ospf priority 0
> ipx network 111
> no arp frame-relay
> frame-relay map ip 150.1.111.3 503 broadcast
> frame-relay map ip 150.1.111.4 503 broadcast
> frame-relay map ipx 111.0003.0003.0003 503 broadcast
> frame-relay map ipx 111.0004.0004.0004 503 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface Serial2
> no ip address
> shutdown
> !
> interface Serial3
> no ip address
> shutdown
> !
> interface BRI0
> no ip address
> shutdown
> isdn x25 static-tei 0
> !
> router ospf 1
> router-id 150.1.5.5
> log-adjacency-changes
> area 0 authentication
> area 51 authentication message-digest
> area 51 virtual-link 150.1.2.2 authentication-key cisco
> network 150.1.5.5 0.0.0.0 area 0
> network 150.1.111.5 0.0.0.0 area 0
> network 150.1.222.5 0.0.0.0 area 51
> !
> router bgp 256
> no synchronization
> bgp log-neighbor-changes
> network 195.1.5.0
> neighbor 150.1.222.6 remote-as 256
> !
> ip classless
> ip http server
> !
> !
> !
> !
> ipx router eigrp 11
> network 111
> !
> !
> ipx router nlsp
> area-address 0 0
> !
> !
> ipx router rip
> no network 111
> no network 222
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
> R5#
> TermServ-34>6
> [Resuming connection 6 to rack3r6 ... ]
>
> R6#sh run
> Building configuration...
>
> Current configuration : 1945 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R6
> !
> logging rate-limit console 10 except errors
> enable password cisco
> !
> ip subnet-zero
> !
> !
> no ip finger
> no ip domain-lookup
> !
> ipx routing 0006.0006.0006
> ipx internal-network 6666
> call rsvp-sync
> cns event-service server
> !
> !
> !
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 150.1.6.6 255.255.255.0
> ipx network 6
> !
> interface Loopback10
> ip address 195.1.6.6 255.255.255.0
> !
> interface BRI0/0
> no ip address
> shutdown
> !
> interface Ethernet0/0
> ip address 150.1.222.6 255.255.255.0
> ip ospf message-digest-key 1 md5 cisco
> ip ospf network point-to-multipoint
> half-duplex
> ipx network 222
> ipx nlsp enable
> standby 1 priority 25 preempt
> standby 1 ip 150.1.222.1
> !
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> shutdown
> frame-relay lmi-type cisco
> !
> interface TokenRing0/0
> no ip address
> shutdown
> ring-speed 16
> !
> interface FastEthernet1/0
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface ATM3/0
> no ip address
> shutdown
> no atm ilmi-keepalive
> !
> router ospf 1
> router-id 150.1.6.6
> log-adjacency-changes
> area 51 authentication message-digest
> network 150.1.6.6 0.0.0.0 area 51
> network 150.1.222.6 0.0.0.0 area 51
> !
> router bgp 256
> no synchronization
> bgp log-neighbor-changes
> network 195.1.6.0
> neighbor 150.1.222.2 remote-as 256
> neighbor 150.1.222.2 route-reflector-client
> neighbor 150.1.222.5 remote-as 256
> neighbor 150.1.222.5 route-reflector-client
> !
> ip kerberos source-interface any
> ip classless
> no ip http server
> !
> !
> !
> !
> ipx router nlsp
> area-address 0 0
> !
> !
> ipx router rip
> no network 222
> !
> !
> !
> !
> voice-port 2/0/0
> !
> voice-port 2/0/1
> !
> dial-peer cor custom
> !
> !
> !
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> transport input none
> line aux 0
> exec-timeout 0 0
> logging synchronous
> line vty 0 4
> exec-timeout 0 0
> logging synchronous
> no login
> !
> end
>
>
>
>
>
>
> > Guys,
> >
> > I have re created the configs for Cyscoexpert labs, since I was getting
> > a
> > few queries. It would create havoc to send the config to the whole group
> > (also, zipped or attachments are not supported).
> >
> > Can someone suggest if a similar service exists on Group study FTP
> > server
> > (if such a thing exists). Otherwise I will prolly upload it on one of
> > the
> > free sites and post the url..
> >
> > The reason I want to do is to get the discussion on the ways other
> > people
> > have configged it, and I am also planning to suggest different ways
> > (where
> > possible) to acheive the same result.
> >
> > rgds
> > Nick
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:29 GMT-3