From: Richard Young (cc_young@xxxxxxxxxxx)
Date: Sat Jul 13 2002 - 22:20:45 GMT-3
This worked, but I had to be in config mode.
Thanks,
Richard
P729 wrote:
> Did you try the 'partition flash 1 16" global command?
>
> Regards,
>
> Mas Kato
> https://ecardfile.com/id/mkato
> ----- Original Message -----
> From: "Richard Young" <cc_young@pacbell.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, July 13, 2002 2:10 PM
> Subject: Adding 2500 Flash Memory Creates two partitions
>
> > Hi,
> > I am trying to add a second 8 mb flash memory module to a Cisco 2500.
> > It adds the second module as a separate partition. I have erased the
> > flash in both partitions, power cycled the router and cannot seem to
> > figure out why it will not allow me to merge the two partions into one
> > so that I can upload a flash image larger than the single 8mb flash
> > size. Both Flash modules are Intel, and the Boot roms are 11.0(10c).
> >
> > Anybody with an Idea how to get the two midules to be seen as one
> > partition?
> >
> >
> >
> > 0:00:07: %SYS-5-RESTART: System restarted --
> > Cisco Internetwork Operating System Software
> > IOS (tm) 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
> > RELEASE SOFTWARE (fc1)
> > Copyright (c) 1986-1996 by cisco Systems, Inc.
> > Compiled Fri 27-Dec-96 17:33 by loreilly
> > r5(boot)#
> > r5(boot)#sh flash all
> > Partition Size Used Free Bank-Size State Copy
> > Mode
> > 1 8192K 0K 8192K 8192K Read/Write Direct
> >
> > 2 8192K 0K 8192K 8192K Read/Write Direct
> >
> > System flash directory, partition 1:
> > No files in System flash
> > [0 bytes used, 8388608 available, 8388608 total]
> > 8192K bytes of processor board System flash (Read/Write)
> >
> > Chip Bank Code Size Name
> > 1 1 89A0 2048KB INTEL 28F016SA
> > 2 1 89A0 2048KB INTEL 28F016SA
> > 3 1 89A0 2048KB INTEL 28F016SA
> > 4 1 89A0 2048KB INTEL 28F016SA
> >
> > System flash directory, partition 2:
> > No files in System flash
> > [0 bytes used, 8388608 available, 8388608 total]
> > 8192K bytes of processor board System flash (Read/Write)
> >
> > Chip Bank Code Size Name
> > 1 1 89A0 2048KB INTEL 28F016SA
> > 2 1 89A0 2048KB INTEL 28F016SA
> > 3 1 89A0 2048KB INTEL 28F016SA
> > 4 1 89A0 2048KB INTEL 28F016SA
> > r5(boot)#
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:29 GMT-3