From: Colin Barber (Colin.Barber@xxxxxxxxxxxxxx)
Date: Sat Jul 13 2002 - 06:11:42 GMT-3
The out/in/either refers to the load on the line. You can monitor incoming,
outgoing or either.
dialer load-threshold 125 in - will bring up the second link when incoming
load reaches 50%
dialer load-threshold 125 out - will bring up the second link when outbound
load reaches 50%
dialer load-threshold 125 either - will bring up the second link either
incoming or outbound load reaches 50%
I think that if you do not specify in/out/either out is used.
Colin
-----Original Message-----
From: Anthony Pace [mailto:anthonypace@fastmail.fm]
Sent: 12 July 2002 19:41
To: John White; steven.j.nelson@bt.com
Cc: ccielab@groupstudy.com
Subject: RE: dialer laod-threshold
What is the funtion of the out/in/either switch on the dialer load
threshold? Isn't "outbound" the only way a router can bring up abnohter
channel?
Anthony PaAce
On Fri, 12 Jul 2002 18:03:55 +0000, "John White"
<jan_white7@hotmail.com> said:
> Thanks
> You've got me interested in . How about on way dial?Would you put the
> statement on both.?
> Jan
>
>
> >From: steven.j.nelson@bt.com
> >To: jan_white7@hotmail.com
> >Subject: RE: dialer laod-threshold
> >Date: Fri, 12 Jul 2002 17:33:28 +0100
> >
> >Jan
> >
> >If it is two way dial then you need only the statements on the box that
> >wants to bring the second channel up using the in or out keyword on the
> >dialer load-threshold command.
> >
> >Thanks
> >
> >Steve
> >-----Original Message-----
> >From: John White [mailto:jan_white7@hotmail.com]
> >Sent: 12 July 2002 16:54
> >To: Nelson,SJ,Steven,IVNH33 C
> >Cc: ccielalb@groupstudy.com
> >Subject: RE: dialer laod-threshold
> >
> >
> >
> >Steve,
> >This is 2 way dial .BTW do I need second dialer map statement on both
ends
> >of ISDN line.?
> >Thanks
> >Steve
> >
> > >From: steven.j.nelson@bt.com
> > >To: jan_white7@hotmail.com
> > >Subject: RE: dialer laod-threshold
> > >Date: Fri, 12 Jul 2002 08:58:58 +0100
> > >
> > >Jan
> > >
> > >It depends on whether it is one way or two way dial, you will also need
> >to
> > >add ppp multilink...
> > >
> > >Thanks
> > >
> > >Steve
> > >
> > >-----Original Message-----
> > >From: John White [mailto:jan_white7@hotmail.com]
> > >Sent: 12 July 2002 07:17
> > >To: ccielab@groupstudy.com
> > >Subject: dialer laod-threshold
> > >
> > >
> > >Hi Guys,
> > >I'm asked to configure dialer interface such way, so second B-channel
> > >should
> > >
> > >come up when load exceeds 30% .Should I configure command "dialer
> > >load-threshold either " on both ends of ISDN link, or just one.?I think
I
> > >read something long time ago, that this command should only be use on
one
> > >end ,so there is no conflict between the routers , when they both try
to
> > >bring the link up.Can anybody confirm this?
> > >Thanks
> > >Jan
> > >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:28 GMT-3