From: Rthugo1@xxxxxxx
Date: Fri Jul 12 2002 - 19:00:41 GMT-3
> Subj:Re: Re: Emutel Solo Setup
> Date:7/11/2002 6:41:38 PM Central Standard Time
> From:<A HREF="mailto:ccie2b@cox.net">ccie2b@cox.net</A>
> To:<A HREF="mailto:Rthugo1@aol.com">Rthugo1@aol.com</A>
> Sent from the Internet
>
>
Joe,
Here you go:
Under Software setup on the Emutel, use the following settings:
Network Type - NAT-1
SPIDs - Mandatory
Numbering System - 2 DN/2 SPID (Fixed B)
*All the other settings, leave at default - NO
*Move the cursor down to SPIDS and hit enter...........this is your dial
string and DN
ex: Channel #1 Tel No 384000 3840000001
I I
I I
this is your DN this is your dial
string
*On your BRI int config, you would put:
isdn spid1 (dial string) (DN)
*So your config for both spids on router 1 would be:
isdn spid1 3840000001 384000
isdn spid2 3840000002 384010
and your config for both spids on router 2 would be:
isdn spid1 3840200001 384020
isdn spid2 3840200002 384030
This should get you going..........if you need a sample router config, hit me
back.
PEACE,
Rob H. NP, DP, blah,blah,blah.............
> Rob,
>
> I don't have have the manual but did see some documentation online. The
> thing is that since I have limited experience with ISDN, configuring the
> sim is confusing. (I.E. switch-type, P2P or P2M, SPID formats, etc..) Do
> you have a basic setup that you could help me with just to get the darn
> thing to work so I can concentrate on configuring the router to use the
> line. Any help would be greatly appreciated... Thanks...
>
> Joe
> >
> > From: Rthugo1@aol.com
> > Date: 2002/07/11 Thu PM 06:42:44 EDT
> > To: ccie2b@cox.net
> > Subject: Re: Emutel Solo Setup
> >
> > In a message dated 7/11/02 11:19:41 AM Central Daylight Time,
> ccie2b@cox.net
> > writes:
> >
> > << Subj: Emutel Solo Setup
> > Date: 7/11/02 11:19:41 AM Central Daylight Time
> > From: ccie2b@cox.net (CCIE2B)
> > Sender: nobody@groupstudy.com
> > Reply-to: ccie2b@cox.net (CCIE2B)
> > To: ccielab@groupstudy.com
> >
> > Joe,
> >
> > Did your's come with the manual? If not, I have it and could send you a
> copy.
> >
> > Rob H. NP, DP, blah,blah,blah...........
> >
> >
> >
> > Guys,
> >
> > I was wondering if anyone has set up an Emutel Solo. There are many
> > different
> > options for threee different switch types. I have limited ISDN
> knowledge and
> > was hoping that some else how has more knowledge could lend a hand.
> >
> > Joe
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:28 GMT-3